close
close

Gas Fireplace Won T Start But Pilot Light Is On

th 3063

Gas Fireplace Won T Start But Pilot Light Is On. If the receiver gets defective, the gas valves will not receive the signals. If the pilot light goes out, redo the procedure and wait for more than a minute before you release the gas control knob.

Gas Fireplace Pilot Light Won T Turn On BClight
Gas Fireplace Pilot Light Won T Turn On BClight from www.bclight.com

The thermocouple is a device that senses the gas flow and allows the valve to supply gas to the pilot light. The gas line to the system itself needs to be open. At this point, the pilot light should continue to burn.

Gas Fireplace Won’t Stay Lit, But The Pilot Light Does.

If the receiver gets defective, the gas valves will not receive the signals. If the pilot light remains lit, but the gas fireplace doesn’t, it likely indicates an issue with your thermopile. Where is the pilot light on a gas fireplace?

If This Isn’t The Issue, Then There May Be A Problem With The Gas Feed To Your Home.

The pilot light comes on and burns strong, but the main burner doesn't. In simple words, the gas valves remain closed, and no gas will go to the pilot. One of the biggest problems associated with gas fireplaces is related to the pilot light.

You Can Extend The Life Of Your Gas Fireplace And Thermopile By.

Then i still have the same problem on other days where it won't fire. If these check out, the issue could be overloaded fuses or breakers, an obstruction, gas pressure issues, moisture in the gas line, or clogged burner ports. With the gas on, push in and hold the pilot valve while igniting the pilot light.

This Means That The Pilot Flame Does Not Have To Be Kept On Throughout The Time When The Gas Fireplace Is On.

If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. The pilot, found as part of the ignition, can often be seen when looking down from above within the firebox or below through the control area. Shut off the fireplace, ensure your home is vented and call your gas company or a professional technician.

If The Pilot Light Goes Out, Redo The Procedure And Wait For More Than A Minute Before You Release The Gas Control Knob.

Alleyne says to look for and clear out any debris between the igniter and thermocouple. At this point, the pilot light should continue to burn. Often times a pilot light won’t turn on, resulting in absolutely zero flames happening in your fireplace.

Leave a Reply

Your email address will not be published.